Radiator Cleaning
Radiators are steam cleaned internally, externally and assessed for any internal blockages.
Radiator Testing
Radiators are pressure-tested using air under water to locate any leaks and the general condition of radiator.
Radiator Repairs
Repairs are undertaken by our own skilled staff and can involve repairs to cores, tube to plate joints, header tanks and gaskets.
Radiator Overalls
Radiator overalls involve the removal of tanks, re-soldering of all tube-to-tube plate joints and re-fitting of tanks using new gaskets or soldered joints.
Radiator Re-Coring
Radiators when not repairable are re-cored using the best suited core from the range of cores available from AKS. Radiators are re-cored re-using tanks and side panels, bringing the unit back to as-new condition. All radiators are fully tested before leaving AKS workshops.
Radiator Spares
AKS offer a full range of radiator spares for most types and makes, from direct replacement complete units, radiator cores, gaskets sets, header tanks, supports and pressure caps.
Do you need emergency breakdown assistance or have a general enquiry about your diesel engine generator radiator?
Case Studies
Test & Inspection of Refrigerant Condenser
About This Project We received an enquiry from an engineering services company based in Aberdeen, Scotland, to test and inspect a refrigerant condenser. The condenser was from a North Sea oil rig, and upon inspection we found that the end covers, which were made from carbon steel and rubber [...]
Ships Main Engine Charge Air Cooler
About This Project We were contacted by the ships manager of a UK based ship management company to manufacture a replacement charge air cooler for the main engine on one of their ships which was docked in Singapore. The shipping management company had a charge air cooler in place, [...]
Standby Generator for Remote Cooling System
About This Project In summer 2019 we we received an enquiry from a UK based data centre. They had run some tests on their current cooling system and sent us some data with the purpose of manufacturing a brand new heat exchanger to cool their standby generator. [...]