AKS completes refurbishment of a selection 12 shell & tube heat exchangers for a vessel in Dry Dock located in Hamburg, all units was replaced or re-tubed to original specification with class approval on time and within budget.
AKS completes order for 6 new RNB tube plates 1240 x 650 x 26mm with 2340 tube holes and 84 bolt holes for new client in Germany. For tube heat exchangers, please give us a call or contact us via our enquiry form to speak with our dedicated customer services [...]
AKS wins a contract to re-manufacture 16 transformer oil cooler tube nests with 90/10 CuNi tubes, RNB tube plates and brass baffles, the contract also involves removal of old tube nests and installation of new nest with new seals and gaskets for electric power plant.
AKS successfully completes the first of 2 Shell & Tube Refrigerant Condenser Re-tubes on vessel during sailing using 90/10 CuNi intergron tubes, the work was completed within the time scales permitted, A further order to re-tubed a second condenser was issued to AKS with work to be undertaken in November [...]
AKS Heat Transfer Ltd wins an order to design manufacture and supply 3 hot air blower dryers for Fisher Tankship UK, AKS heat Transfer Ltd was chosen by the client because of the ability of AKS to meet the short time delivery dates required, the first unit is to be [...]
AKS Heat Transfer Ltd successfully completes the re-manufacture of 2 x 16-E-17 A/B shell & tube condenser tube nests for the Warri refinery Nigeria from a drawing to original specification, all materials, dimensions and inspections was approved and undertaken by Lloyds Register.
AKS Heat Transfer completes major M30 Plate Heat Exchanger Up-grade for Maersk FPSO Peregrino vessel operating off the coast of Brazil. The up-grade involved the modification of the original plate pack from 201 x Titanium 0.6 thick plates with HNBR gaskets, the original unit having failed whislt in production the [...]
AKS Heat Transfer Ltd has opened its new head office and workshop facilities in Sheffield. The new facilities allow improved productivity and new innovations in product lines resulting in increased product AKS can offer our clients.
Made in Sheffield, UK, the new Superfin block for main engine charge air coolers and FinFan coolers is produced with copper or aluminium fins, mechanically bonded to tubes. This results in a block type cooling element. This procedure improves quality and efficiency that allows AKS to upgrade existing coolers while [...]
AKS Heat Transfer expansion continues with the opening of its new facility in Antwerp, Belgium. The new sales and works location allows AKS Heat Transfer Benelux to offer a full range of services at a local level. The facility, backed by its UK HQ, will offer a service, repair, refurbishment [...]
AKS Heat Transfer returns refurbished Serck Heat Transfer Shell & Tube Heat Exchangers to BAE Systems Ltd. The four BAE Systems coolers were totally re-tubed using 70/30 copper nickel tubes and the complete coolers were pre-conditioned with film protection against premature failure in sea water working conditions. All coolers were fully [...]
AKS Heat Transfer wins order to refurbish ten large pressure motor air coolers from the Buzzard Platform North Sea Nexen Oil & Gas International required a specialist company to refurbish 10 high pressure motor air coolers fitted to their production high pressure compressors located in the Buzzard platform in [...]